Remanufacturing of paper waste for pencil production: a sustainable business assessment
Abstract
Large amounts of waste paper are generated annually worldwide. Although some of it is recycled, up to 50% is landfilled or incinerated. The remanufacturing of waste paper to produce pencils is proposed as a novel, sustainable business solution. A sustainability analysis of this process was performed to quantify indexes of technical, environmental, economic, and social sustainability. Small-to-medium business models were evaluated, in which 15 000 pencils/shift/day can be produced from 135 kg of waste paper, with a maximum productivity of 64 800 pencils/day. Productivity, operating costs, power consumption, land footprint, machine delivery cost, and number of workers were used to analyze the technical feasibility. The cost-to-profit ratio, cost and profit per pencil, and daily profit were used to evaluate economic sustainability. The amounts of municipal solid waste and recovered paper waste, saved embodied energy, and prevented CO2 emissions were used to analyze environmental sustainability. The number of workers and labor costs were used to evaluate human development and social sustainability. The machines required for the remanufacturing line are considered sufficiently mature, remanufactured pencils are less expensive to produce than wooden pencils, and the proposed process minimizes the amount of waste paper sent to landfills and avoids the use of new wood for producing pencils, thereby satisfying technical, economic, and environmental sustainability, respectively. The final sustainability index of 0.9 is considered very high and sufficient for operating a profitable, sustainable business with a profit of 252–583 USD/day.
1. Introduction
In the face of mounting environmental challenges, the remanufacturing of waste paper has emerged as a viable and sustainable approach to managing paper waste and mitigating its impact on the planet. Annually, over 400 million tons of paper waste are generated worldwide, with only 50%–65% being recycled, leaving a significant portion to be disposed of in landfills or incinerated (Nzediegwu and Dumont 2021). Waste newspapers, constituting approximately 7% of the total municipal solid waste (MSW) stream, are a potential low-cost cellulosic material (Guan et al. 2021). Up to ∼35% of the weight of MSW is waste paper, and the global paper industry is anticipated to produce 500 million tons of paper per year for tissue papers, newspapers, cardboard paper, and shoe sole inserts (Kolajo and Onovae 2023).
One of the most critical environmental benefits of recycling waste paper lies in reducing greenhouse gas (GHG) emissions. Recycling domestic waste paper has been recognized as a promising approach to achieving this goal. Life-cycle assessments considering the entire process from raw material acquisition to manufacturing, energy production, transportation, wastewater treatment, and chemical production have shown that recycling can lead to a significant reduction in GHG emissions, ranging from 0.8% to 12.2% (Deng et al. 2023). Furthermore, exporting waste paper for recycling has shown varying impacts on global warming, with potential reductions ranging from 0.27 to 2.25 kg CO2-eq/kg wastepaper recycled (2019 data) (Provost-Savard et al. 2023). A case study in Hong Kong highlights the significance of waste paper remanufacturing in reducing greenhouse gas emissions. Waste paper was the second-largest component (24%; 1.7 Mt) of MSW after food waste (30%) in Hong Kong in 2020 (Chen et al. 2023). With only 32% of the waste paper being recycled and the remaining 68% being landfilled, a considerable amount of CO2-eq was generated from waste paper treatment. By implementing recycling-intensive practices, Hong Kong can achieve significant net GHG emissions reduction (Chen et al. 2023).
The main use of recycled paper fibers is as a raw material for producing new paper, especially newsprint, thereby reducing the demand for virgin fibers, the amount of waste diverted to landfills, and the overall cost of the paper-making process (Negaresh et al. 2013). In the pursuit of environmentally friendly waste-paper recycling methods, enzymatic deinking using cellulase or laccase enzymes has gained attention. Traditional deinking processes for wastepaper require various toxic and harsh chemicals that reduce the quality of the paper. Researchers have explored individual and combined use of enzymes, leading to improved deinking efficiency compared to traditional chemical deinking systems (Akbarpour 2023; Dixit and Shukla 2023). This approach presents a greener alternative to conventional deinking processes that rely on hazardous chemicals, but the surface chemical composition, fiber crystallinity and morphology, water retention value, and quality of the final paper produced from the processes need to be optimized (Akbarpour 2023).
The potential of waste paper goes beyond paper production. Studies have demonstrated that waste paper can be converted into activated carbon and adsorbents, making them effective for removing pollutants such as polycyclic aromatic hydrocarbons and phenols from wastewater (Vishnu Priya et al. 2021; Nahar et al. 2023). This innovative application not only addresses environmental concerns but also provides a cost-effective solution for wastewater treatment. In particular, waste newspaper has a high susceptibility to absorbing heavy metals (Wong et al. 2022). The development of cellulose nanocrystals from waste newspapers presents a viable method to improve the physical and mechanical characteristics of polymer composites and value-add the use of waste paper fiber resources to increase economic advantages (Mohammed Irfan et al. 2023). By subjecting waste newspapers to a simple pretreatment and hydrolysis process, researchers have obtained cellulose nanocrystals that, when added to polymer composites at a ratio of 5%, result in increased tear, tensile, and burst indices (Guan et al. 2021). This advancement not only enhances the performance of materials but also provides economic advantages through the effective utilization of waste paper fibers. Waste newspaper has been used to prepare environmentally friendly and cost-effective structural materials. Laminates were prepared using layered newspaper and high-density polyethylene film through stearic acid modification and hot-pressing (Zhou et al. 2023). The composite exhibited excellent mechanical and antimildew properties, making it suitable for panel overlayers in various applications, including building, furniture, and packaging.
The construction industry has embraced the concept of using waste newspapers to create sustainable building materials. Lightweight bricks and concrete, incorporating waste newspapers, offer low-cost and environmentally friendly alternatives to traditional construction materials (Keerthana Devi et al. 2023; Sapthagiri et al. 2023). Combining wastepaper sludge ash as an alternative cementitious material to replace cement in ratios up to 5 wt% was demonstrated as an effective strategy to produce low-cost concrete to be used as a novel replacement for traditional concrete (Keerthana Devi et al. 2023). The management and valorization of waste paper fly ash, an industrial by-product from the combustion of paper recycling sludge and biomass, is an area that demands attention (Mkahal et al. 2023). Waste paper can be combusted to recover its embodied energy and converted into ash by incineration at 800 °C for 1 h, followed by cooling and sieving (Wong et al. 2022). The ash is a suitable cementitious material for use in the concrete industry to enhance cleaner production. Carbonation not only delays the setting and improves the stability of the matrix but also contributes to the environmental sustainability of eco-binders. Additionally, co-incineration of sludges with biomass generates waste paper fly ash, which has the potential to be employed as a supplementary cementing material in concrete production (Wong et al. 2022). The use of wastepaper fly ash as a partial replacement for ordinary Portland cement contributes to reduced GHG emissions and enhanced environmental sustainability of eco-binders (Mkahal et al. 2023). The replacement of 20% of ordinary Portland cement with carbonated wastepaper fly ash was shown to reduce GHG emissions by more than 27%.
The pursuit of a carbon-neutral future and a reduction in GHG emissions requires innovative approaches to sustainable energy production. Furthermore, the potential for waste newspapers to be transformed into bioethanol, a renewable and eco-friendly fuel, is a promising strategy for addressing sustainable energy demands. Cellulose fibers extracted from waste newspapers can be hydrolyzed into fermentable sugars and subsequently converted into ethanol using Saccaromyces cerevisae (Kolajo and Onovae 2023). By converting waste newspapers into bioethanol, not only is the dependence on fossil fuels reduced, but the improper disposal of waste paper is also mitigated. Waste newspapers, rich in lignocellulosic biomass, offer a promising source of fermentable sugars for biofuel production (Manna et al. 2020). Through enzymatic hydrolysis, fermentable sugars can be recovered from waste newspapers, providing a renewable and environmentally friendly feedstock for biofuel generation. The utilization of lignocellulosic biomass as a carbon-neutral material ensures that the process of fuel generation does not contribute to CO2 emissions. Furthermore, the use of waste newspaper powder as a source of carbon-based polysaccharides was used as a substrate for the growth of cellulolytic bacteria in microbial fuel cells (Verma et al. 2023).
Current research priorities in the field of paper waste include the production of valuable products from the waste paper (new paper, levulinic acid, bioelectricity, bioethanol, activated carbon and other adsorbents, biodegradable biocomposites, and structural materials); achieving carbon neutrality; improving the recycling process (strengthening recycled fibers, and deinking and acid hydrolysis of the waste paper); and the use of waste-paper sludge ash for cement-making. Remanufacturing waste paper offers a comprehensive and sustainable solution to address the growing environmental concerns associated with paper waste. Through recycling, resource utilization, green technologies, and innovative applications, waste paper can be transformed into a valuable resource, reducing the burden on landfills and mitigating GHG emissions. The exploration of various techniques and applications for waste paper remanufacturing underscores its potential in shaping a greener and more sustainable future.
This case study analyzes a specific process involving the recovery of waste paper from MSW, which is then remanufactured into pencils as an environmentally conscious sustainable business to reduce GHG emissions compared to the landfilling/recycling of waste paper and the production of pencils from wood. Henceforth, the term “remanufacturing” is used to mean the recovery of a waste product (paper) and its upcycling into a commercial value-added product. This remanufacturing process is investigated as a specific small-business model that could be widely relevant as it requires only a low investment. While the production of new paper or biomass from waste paper may be more profitable options, they require high investments and are therefore unsuitable for small businesses. It is estimated that over 8 million trees (13 million hectares of forests) are felled annually worldwide, of which 36% is used for paper manufacturing and 42% is used for manufacturing timber-based products, including 14–20 billion pencils (United Nations 2023). An average tree can produce 170 000 pencils, meaning that almost 100 000 trees are required to produce the billions of pencils used worldwide every year (Pencil China 2023; World Atlas 2023). The sourcing of pencil wood is an environmental concern, and in recent decades, many earth-friendly pencils have been commercialized, including those using wood harvested from sustainably managed forests or made from recycled coffee grounds, while some even contain seeds to grow new plants (ARTnews.com 2022). In addition to deforestation, the forestry industry contributes to environmental impacts related to the trucks and machinery used (Sharma 2020).
First, a qualitative technical assessment was performed based on regression modelling to evaluate the technical maturity of the required remanufacturing machines with respect to various performance metrics and calculate a technical feasibility index. Then, an economic analysis of five remanufacturing alternatives (with various pencil yields) was performed considering machine investments and labor and energy costs. Then, quantitative technical, economic, and environmental feasibility assessments were performed based on the weighted-sum method and regression plots, while a quantitative–qualitative analysis was performed to analyze the social feasibility of the process on the number of workers and labor costs. In addition, based on the background discussed above, the potential waste paper resources available for pencil remanufacturing were quantified based on literature data for the amount of MSW produced by each country. Finally, the overall sustainability is discussed based on the technical, economic, environmental, and social sustainability metrics and a final sustainability index (SI) was calculated based on weights of importance from the literature. The findings are expected to provide a reference for further sustainability studies of paper remanufacturing, as well as insights for business owners and decision makers in the field of paper recycling.
2. Data collection and analysis
This study used both quantitative and qualitative data to perform the sustainability analyses. For the assessment of the technical and economic feasibility, parameters such as the investment and delivery costs, energy usage, and land footprint of the machines used in the process were obtained from technical information provided by the machine manufacturers. Furthermore, to verify the practicality of the process, parameters such as the required number of workers for each machine were obtained by analyzing the datasets and consulting with the manufacturers of the commercial machines. The data for the environmental assessment was mainly obtained from World Bank data on the amounts of waste paper produced by various countries/regions each year. These data were converted to amounts of available waste paper and energy and carbon savings, as detailed in Section 4. Various conversion factors and statistics were also taken from the literature (as cited throughout the paper).
The main method used to assess the sustainability of the proposed process was regression analysis to define sustainability satisfaction factors from the fitting coefficient (R2). Relevant parameters were ranked in decreasing order and plotted. Then, regression analysis was performed to identify a line of best fit to the curve, where the resulting R2 value was taken as the satisfaction factor. There is no practical or theoretical meaning related to the curve (no specific model/equation being fit), so no equations are shown. The fit is simply used to quantify the degree of consistency between the data in the dataset, where high R2 values (high level of consistency) are taken as an indication of high sustainability.
3. Technical feasibility
The steps in the remanufacturing process of producing pencils from waste paper include the following: (1) cutting the waste paper to size (width of 18 cm and length of 48–54 cm); (2) wetting the waste paper with glue and rolling it around a 6-mm diameter pencil lead; (3) drying the pencil rod; (4) cutting the rod to length and polishing; (5) shrink wrapping the pencil with an outer film of the desired color and pattern; and (6) attaching an aluminum eraser hoop. Figure 1 shows photographs of pencils produced during preliminary experiments in this case study.
Fig. 1.
The analysis of the technical maturity was based on data obtained from the literature and information provided by the suppliers of the industrial-scale machinery required for the proposed remanufacturing process. Each data point represents an average or estimated value based on the combination of information from various sources. Five technical maturity indexes (cost, power, land footprint, delivery cost, and number of workers) were plotted against the productivity (number of pencils produced per hour), as shown in Fig. 2, and fitted to obtain regression coefficient (R2) values that were taken as the technical maturity factors of Tsf1 = 0.76, Tsf2 = 0.62, Tsf3 = 1, Tsf4 = 0.87, and Tsf5 = 0.92, respectively. Higher R2 (Tsf) values indicate a higher level of consistency between the data, i.e., a higher technical maturity of the remanufacturing machine designs. Since all of the five technical criteria have equal importance, the average of the Tsf values was taken as the technical feasibility index of T = 0.84. This value exceeds the threshold of 0.6 proposed as the minimum to achieve a profitable sustainable business (Du et al. 2012; Abdullah 2021a, 2021b), while the divergence from the ideal solution of T = 1 implies a practical sustainable solution.
Fig. 2.
4. Environmental sustainability
Literature related to MSW, waste paper, and its recycling processes was reviewed to define lower and upper bounds of environmental sustainability remanufacturing potentials based on factors such as the quantity of recovered MSW (obtained from World Bank data), fraction of waste paper in the MSW, saved embodied energy, prevented CO2 emissions, and data related to the machinery for waste paper-based pencil remanufacturing. The saved embodied energy was calculated based on the comparison with the worst-case scenario of open-air burning of waste paper as biomass, while the CO2 emissions savings consider the saved energy and the emissions produced during the remanufacturing process. The following constraints and formulas were used to calculate the amount of recovered waste paper, saved embodied energy, and prevented CO2 emissions as environmental metrics for evaluating the viability of producing pencils from waste paper. The lower and upper bounds of the weight of recovered waste paper (WPlb and WPub, respectively, in Mt) were calculated using eqs. 1 and 2, respectively.
(1)
(2)
Here, F1 = 15% is the fraction of paper in the MSW, which was calculated by multiplying the mean percentage of paper and cardboard in the MSW (25%; Saeed et al. 2009; Zhang et al. 2010; Ionescu et al. 2013; Joshi et al. 2015; Czajczyńska et al. 2017; Malinauskaite et al. 2017; Abdel-Shafy and Mansour 2018; Mmereki 2018; US Department of Energy 2019; Manna et al. 2020; Mohan and Joseph 2020; Rahman et al. 2020; Stafford 2020; Hoang et al. 2022; Center for Sustainable Systems University of Michigan 2023; International Trade Administration 2024; Non-ferrous metal prices 2017 – letsrecycle.com 2023; US Environmental Protection Agency 2023) by 60% as the fraction of paper (Paper Mart 2022; Toner Buzz 2023), because cardboard is not suitable for pencil-making. Here, Flb and Fub are estimates of the minimum and maximum percentages of useful recovered paper and were set as 13% and 33%, respectively (Paper Mart 2022; Toner Buzz 2023). The lower and upper bounds of saved embodied energy (Elb and Eub, respectively) were calculated by multiplying WPlb and WPub by 18.44 and 50.44 MJ/kg (Ashby 2012), respectively, as the embodied energies saved by remanufacturing 100% virgin paper or 100% recycled paper into pencils. The lower and upper bounds of saved CO2 emissions (CO2Slb and CO2Sub (Mt CO2), respectively) were calculated by multiplying WPlb and WPub by 0.785 and 1.18 kgCO2/kg (Ashby 2012), respectively, as the emissions prevented by remanufacturing 100% virgin paper or 100% recycled paper into pencils.
Other metrics used in the calculations include 0.441 kWh/kg (or 1.56 MJ/kg (PPEC 2023)) as the energy required to remanufacture waste paper into pencils according to this study, which corresponds to CO2 emissions of 0.32 kgCO2/kg for remanufacturing waste paper into pencils; and 0.2 kgCO2/MJ was used to calculate the CO2 emissions directly related to electricity use (Ashby 2012).
World Bank data related to the production of MSW in all countries was used to calculate the environmental metrics using the equations described above and classified into ten scales: global 2050 scale (Table 1), global 2016 scale (Table 2), high-income countries 2050 scale (Table S1), high-income countries 2022 scale (Table S2), upper-middle-income countries 2050 scale (Table S3), upper-middle-income countries 2022 scale (Table S4), lower-middle-income countries 2050 scale (Table S5), lower-middle-income countries 2022 scale (Table S6), low-income countries 2050 scale (Table S7), and low-income countries 2022 scale (Table S8). Both recent data (2016 or 2022) and projections for 2050 are included to enable a comparison of the current and anticipated future sustainability potential of recovering paper waste for pencil remanufacturing.
Table 1.
| Country/region | MSW (million ton) | Recovered waste paper (million ton) | Saved energy (GJ) | Saved CO2 emissions (million tonCO2) |
|---|---|---|---|---|
| East Asia and Pacific | 714 | 13.9–35.3 | 256.7–1782.7 | 10.9–41.7 |
| South Asia | 661 | 12.9–32.7 | 237.7–1650.4 | 10.1–38.6 |
| Sub-Saharan Africa | 516 | 10.1–25.5 | 185.5–1288.3 | 7.9–30.1 |
| Europe and Central Asia | 490 | 9.6–24.3 | 176.2–1223.4 | 7.5–28.6 |
| India | 482 | 9.4–23.9 | 173.3–1203.4 | 7.4–28.2 |
| China | 478 | 9.3–23.7 | 171.9–1193.5 | 7.3–27.9 |
| North America | 396 | 7.7–19.6 | 142.4–988.7 | 6.1–23.1 |
| Latin America and Caribbean | 369 | 7.2–18.3 | 132.7–921.3 | 5.6–21.6 |
| United States | 256 | 5–12.7 | 92.1–639.2 | 3.9–15 |
| Middle East and North Africa | 255 | 5–12.6 | 91.7–636.7 | 3.9–14.9 |
Table 2.
| Country/region | MSW (million ton) | Recovered waste paper (million ton) | Saved energy (GJ) | Saved CO2 emissions (million tonCO2) |
|---|---|---|---|---|
| East Asia and Pacific | 468 | 9.1–23.2 | 168.3–1168.5 | 7.2–27.3 |
| South Asia | 392 | 7.6–19.4 | 141–978.7 | 6–22.9 |
| Sub-Saharan Africa | 362 | 7.1–17.9 | 130.2–903.8 | 5.5–21.1 |
| Europe and Central Asia | 334 | 6.5–16.5 | 120.1–833.9 | 5.1–19.5 |
| India | 289 | 5.6–14.3 | 103.9–721.6 | 4.4–16.9 |
| China | 274 | 5.3–13.6 | 98.5–684.1 | 4.2–16 |
| North America | 231 | 4.5–11.4 | 83.1–576.8 | 3.5–13.5 |
| Latin America and Caribbean | 192 | 3.7–9.5 | 69–479.4 | 2.9–11.2 |
| United States | 174 | 3.4–8.6 | 62.6–434.4 | 2.7–10.2 |
| Middle East and North Africa | 129 | 2.5–6.4 | 46.4–322.1 | 2–7.5 |
The environmental metrics rankings shown in Tables 1 and 2 were plotted as regression curves (Figs. 3 and 4), where the R2 values of fits to these curves were taken as the environmental sustainability satisfaction factor (ESsf) values. Only the plots for the recovered paper waste are shown because the other metrics scale linearly with these data and give regression curves with the same R2 values. The mean of the R2 values obtained from these figures was taken as the average E = 0.97. This value exceeds the threshold of 0.7 defined in the literature as the minimum value required to satisfy the multiple-bottom line criteria for developing an environmentally sustainable business (Du et al. 2012; Abdullah 2021a, 2021b). Furthermore, divergence from the ideal solution of E = 1 proves that the solution is reasonable for practical implementation.
Fig. 3.
Fig. 4.
This analysis highlighted significant environmental benefits in terms of the annual saved embodied energy (prevented CO2 emissions) of 1168–1783 GJ (27–42 million tCO2) in East Asia and the Pacific, 903–1193 GJ (21–28 million tCO2) in China, 685–1203 GJ (16–28 million tCO2) in India, 479–640 GJ (11–15 million tCO2) in the USA, 16–111 GJ (0.68–2.6 million tCO2) in the Congo, and 6.5–45 GJ (0.28–1.1 million tCO2) in Ethiopia, as representative examples. The lower limit is based on calculations using 2016 data and the upper limit used 2050 predictions.
5. Economic sustainability
Various metrics were calculated to evaluate the economic sustainability of the pencil remanufacturing process. To provide guidance on the viable size of potential small businesses based on this technology, five alternative businesses with different pencil capacities (production per day) are proposed and evaluated. The capital investment costs for the required machines are listed for the five alternatives in Table 3. Because the investment costs are similar for all alternatives, the higher-productivity alternatives are more economically viable in terms of the payback per day or per pencil. In terms of the energy use of the machines, all lines for all alternatives use 7.44 kW/h or 179 kWh/day, with a total cost of 22 USD/day or 1.64, 1.37, 1.18, 1.03, and 0.92 USD/million pencils for A1, A2, A3, A4, and A5, respectively. These values are based on a global industrial electricity price of 0.121 USD/kWh (2021 data) (Statista 2023). The delivery and installation costs include the initial delivery of the machines, along with the delivery costs for 6 months worth of raw materials (pencil graphite, erasers, shrink film, and glue). The labor and land use costs for operating the machines and storing paper waste are shown in Table 4, assuming a single manufacturing line for all alternatives and an average global minimum wage of 23 USD/day. The alternatives with higher capacity (productivity targets) require more/larger machines and, therefore, more workers to operate the machines (and higher labor costs). Based on a machine footprint of 100 m2 for all alternatives and an industrial land rent cost of 0.25 USD/m2/day (Statista 2022), the land use cost is 25 USD/day.
Table 3.
| A1 | A2 | A3 | A4 | A5 | |
|---|---|---|---|---|---|
| Capacity (pencil/h) | 1500 | 1800 | 2100 | 2400 | 2700 |
| Total line cost (USD) | 4662 | 4662 | 4662 | 4662 | 4662 |
| Delivery/install (USD) | 6000 | 6000 | 9000 | 9000 | 9000 |
| Total investment (USD) | 10 662 | 10 662 | 13 662 | 13 662 | 13 662 |
| Total payback (USD/day) | 29.21 | 29.21 | 37.43 | 37.43 | 37.43 |
| Total payback (USD/million pencils) | 2.22 | 1.85 | 2.03 | 1.78 | 1.58 |
Table 4.
| A1 | A2 | A3 | A4 | A5 | |
|---|---|---|---|---|---|
| Capacity (pencils/h) | 1500 | 1800 | 2100 | 2400 | 2700 |
| No. workers (single shift) | 5 | 5 | 6 | 6 | 8 |
| Total no. workers (three shifts) | 15 | 15 | 18 | 18 | 24 |
| Labor cost (USD/day) | 345 | 345 | 414 | 414 | 552 |
| Labor cost (USD/million ton) | 26.3 | 21.9 | 22.5 | 19.7 | 23.3 |
| Land use cost (USD/million pencil) | 1.9 | 1.6 | 1.4 | 1.2 | 1.1 |
Table 5 summarizes the economic factors of the five alternatives. It was assumed that the pencils can be sold for 0.026 USD/pencil (based on information from the suppliers of pencil remanufacturing machinery and market prices), and waste paper costs 80 USD/ton (Recycling Monster 2023). It can be seen that A1 has the lowest profit (252 USD/day) and A5 has the highest profit (583 USD/day), where a mean profit of 451 USD/ton is achieved for the alternatives. The lower productivity alternatives earn a lower profit because a higher amount of manual work and labor efforts are required. However, even the lowest productivity alternative A1 (producing 1500 pencil/h) can achieve a reasonable profit for a small, sustainable business.
Table 5.
| A1 | A2 | A3 | A4 | A5 | |
|---|---|---|---|---|---|
| Cost of raw materials (USD/day) | 234 | 281 | 328 | 375 | 422 |
| Cost of paper waste (USD/day) | 26 | 31 | 37 | 42 | 47 |
| Daily investment payback (USD/day) | 29.2 | 29.2 | 37.4 | 37.4 | 37.4 |
| Daily energy cost (USD/day) | 21.7 | 21.7 | 21.7 | 21.7 | 21.7 |
| Daily labor cost (USD/day) | 345 | 345 | 414 | 414 | 552 |
| Daily land use cost (USD/day) | 25 | 25 | 25 | 25 | 25 |
| Total cost (USD/day) | 753 | 819 | 962 | 1029 | 1233 |
| Cost per pencil (USD/pencil) | 0.019 | 0.017 | 0.017 | 0.016 | 0.017 |
| Profit (USD/pencil) | 0.007 | 0.009 | 0.009 | 0.01 | 0.009 |
| Profit (USD/day) | 252 | 389 | 454 | 576 | 583 |
Data related to industrial-scale remanufacturing of paper waste to produce pencils were analyzed to plot regression curves and obtain R2 values that were defined as the economic SF (Csf) values (Fig. 5). The cost-to-profit ratio (alternative ranking of A1 > A3 > A5 > A2 > A4), cost per pencil (A4 > A5 > A3 > A2 > A1), profit per pencil (A4 > A2 = A3 = A5 > A1), and profit per day (A5 > A4 > A3 > A2 > A1) were plotted as regression curves (Fig. 5) to give Csf values of 0.82, 0.75, 0.75, and 1, respectively, based on the corresponding R2 values. These high values indicate a high level of consistency between the economic data. The average of these values was taken as the economic sustainability factor C = 0.83, which exceeds the threshold of 0.6 required to operate a sustainable remanufacturing business (Du et al. 2012; Abdullah 2021a, 2021b), with a reasonable divergence from the ideal solution of C = 1, indicating a practical sustainable solution.
Fig. 5.
6. Social sustainability
The social feasibility of the remanufacturing process was evaluated considering the number of required workers and the associated labor costs. A larger workforce and higher wages are considered to enhance human development in the local region, but there is a trade-off with the profitability of the plant. Therefore, the best pencil remanufacturing alternatives for social development are ranked in the order A5 > A4 = A3 > A2 = A1. The social satisfaction factors based on the number of workers (WNsf = 0.92) and labor costs (LCsf = 0.92) were determined from their regression curves shown in Figs. 6A and 6B, respectively. Based on these values and the T = 0.84 derived earlier, the human development satisfaction factor (HDsf = 0.91) was calculated usingeq. 3.
(3)
Fig. 6.
HDsf has the following constraints: (1) A high degree of automation reduces the potential for employment and human development (which are very important for achieving high social sustainability), assuming that economic feasibility is achieved. (2) There is a trade-off between technical feasibility and employment/human development since a high degree of automation increases technical feasibility. The logarithm function is used to ensure that HDsf is maintained between 0 and 1. The social SI (S = 0.92) was taken as the average of HDsf, WNsf, and LCsf. This value is considered very high and more than acceptable to satisfy a profitable, sustainable business, where the reasonable divergence from the ideal solution of 1 indicates a practical, sustainable solution.
7. Overall sustainability
The sustainability assessment is a four-objective optimization problem, which is a quadrilateral-bottom-line assessment with technical, economic, environmental, and social factors. To obtain a better sustainability performance, the three-objective optimization problem (excluding the technical metrics) should be reduced into a composite objective function using the weighted sum method to find one scalar to quantify the solution (Science Direct 2022), so that eq. 4 used to calculate the SI satisfies the constraint of WC + WE + WS = 1, where WC = 0.374, WE = 0.343, and WS = 0.283 are the important weights of economic, environmental, and social sustainability, respectively (Boggia et al. 2018; Abu-Rayash and Dincer 2019; Khadra et al. 2020; Yi et al. 2021; Abedini et al. 2020; Ahmad and Wong 2019; Azadnia et al. 2012; Garg and Kashav 2020; Makan and Fadili 2020; Mattinzioli et al. 2020; Menon and Ravi 2022; Sagnak et al. 2021; Wang et al. 2019; Wicher et al. 2019; Yeh and Xu 2013). The final SI of 0.9 is considered high and exceeds the threshold of 0.68 required to operate a sustainable remanufacturing business (Du et al. 2012; Abdullah 2021a, 2021b).
(4)
8. Conclusions
This case study demonstrated that MSW is a valuable source of paper waste for supplying a remanufacturing plant to produce remanufactured pencils. All of the proposed remanufacturing alternatives exceed the threshold for a sustainable business, so the alternatives were ranked in terms of the generated profit (i.e., higher productivity gives higher profit). Based on a quantity of 2700 pencil/h capacity, the profit can reach 583 USD/day. The final SI of 0.9 is considered high and exceeds the literature threshold for a sustainable remanufacturing business. Limitations of the remanufacturing process include that the waste paper must be collected from the source in a timely manner or adequately stored to prevent the paper from becoming overly deformed or contaminated by other waste. In addition, some paper sources, such as small notebooks, are not suitable for pencil making. Furthermore, while the proposed pencil-making business is probably not the most profitable use of waste paper at large industrial scales, the study shows that it is a viable small business that could contribute to local waste management, while providing employment opportunities for social development and contributing more widely to the UN development goals (and other sustainability targets). The findings of this study are expected to be valuable for policymakers/decision-makers at the community and local-government scales and small-business owners. As a future sustainability direction to promote a circular economy, the eco-design of notebooks and other paper products could be incorporated to promote efficient pencil remanufacturing.
Application limitation
There is no limitation of application to be mentioned.
References
Abdel-Shafy H.I., Mansour M.S.M. 2018. Solid waste issue: sources, composition, disposal, recycling, and valorization. Egyptian Journal of Petroleum, 27(4): 1275–1290.
Abdullah Z.T. 2021a. Remanufacturing end-of-life passenger car waste sheet steel into mesh sheet: a sustainability assessment. PLoS One, 16(10). e0258399
Abdullah Z.T. 2021b. Assessment of end-of-life vehicle recycling: remanufacturing waste sheet steel into mesh sheet. PLoS One, 16(12): e0261079.
Abedini A., Li W., Badurdeen F., Jawahir I.S. 2020. A metric-based framework for sustainable production scheduling. Journal of Manufacturing Systems, 54.
Abu-Rayash A., Dincer I., 2019. Sustainability assessment of energy systems: a novel integrated model. Journal of Cleaner Production, 212.
Ahmad S., Wong K.Y., 2019. Development of weighted triple-bottom line sustainability indicators for the Malaysian food manufacturing industry using the Delphi method. Journal of Cleaner Production, 229.
Akbarpour I., 2023. Surface characterization of pulp fiber from mixed waste newspaper and magazine deinked-pulp with combined cellulase and laccase-violuric acid system (LVS). Bioresource Technology Reports, 23: 101551.
ARTnews.com. 2022. Sustainable: the best eco-friendly graphite pencils. Available from https://www.artnews.com/art-news/product-recommendations/sustainable-the-best-eco-friendly-graphite-pencils-1234626048/ [accessed 14 August 2023].
Ashby M., 2012. Materials and the environment: eco-informed material choice. 2nd ed.
Azadnia A.H., Saman M.Z.M., Wong K.Y., Ghadimi P., Zakuan N. 2012. Sustainable supplier selection based on self-organizing map neural network and multi criteria decision making approaches. Procedia - Social and Behavioral Sciences, 65.
Boggia A., Massei G., Pace E., Rocchi L., Paolotti L., Attard M., 2018. Spatial multicriteria analysis for sustainability assessment: a new model for decision making. Land Use Policy, 71.
Center for Sustainable Systems, University of Michigan. 2023. Municipal solid waste. [Online]. Available from https://css.umich.edu/sites/default/files/2022-09/MSW_CSS04-15.pdf.
Chen P., Sauerwein M., Steuer B., 2023. Exploring greenhouse gas emissions pathways and stakeholder perspectives: in search of circular economy policy innovation for waste paper management and carbon neutrality in Hong Kong. Journal of Environmental Management, 341: 118072.
Czajczyńska D., Anguilano L., Ghazal H., Krzyżyńska R., Reynolds A.J., Spencer N., et al. 2017. Potential of pyrolysis processes in the waste management sector. Thermal Science and Engineering Progress, 3: 171–197.
Deng H., Zhang D., Yu H., Man Y., Wang Y., 2023. Assessing life-cycle GHG emissions of recycled paper products under imported solid waste ban in China: a case study. Science of the Total Environment, 891: 164407.
Dixit M., Shukla P., 2023. Multi-efficient endoglucanase from Aspergillus niger MPS25 and its potential applications in saccharification of wheat straw and waste paper deinking. Chemosphere, 313: 137298.
Du Y., Cao H., Liu F., Li C., Chen X., 2012. An integrated method for evaluating the remanufacturability of used machine tool. Journal of Cleaner Production, 20(1): 82–91.
Garg C.P., Kashav V., 2020. Assessment of sustainable initiatives in the containerized freight railways of India using fuzzy AHP framework. in Transportation research procedia.
Guan Y., Li W., Gao H., Zhang L., Zhou L., Peng F., 2021. Preparation of cellulose nanocrystals from deinked waste newspaper and their usage for papermaking. Carbohydrate Polymer Technologies and Applications, 2: 100107.
Hoang A.T., Varbanov P.S., Nižetić S., Sirohi R., Pandey A., Luque R. 2022. Perspective review on municipal solid waste-to-energy route: characteristics, management strategy, and role in circular economy. Journal of Cleaner Production, 359: 131897.
International Trade Administration. 2024. Pakistan waste management. Available from https://www.trade.gov/country-commercial-guides/pakistan-waste-management.
Ionescu G., Rada E.C., Ragazzi M., Mǎrculescu C., Badea A., Apostol T., 2013. Integrated municipal solid waste scenario model using advanced pretreatment and waste to energy processes. Energy Conversion and Management, 76: 1083–1092.
Joshi N., Khatri S., Tomar R.K., Jain S.K., 2015. Greenhouse gas emissions in present and proposed municipal solid waste management plans and technologies in India: a comparative analysis of CO2 equivalent emissions from centralized and decentralized municipal solid waste management. Environmental Technology, 2(16):21–26.
Keerthana Devi P., Sanchaya M., Harikaran M., Gopi Krishna J., Kaviyarasan V., Venkatesh N. 2023. Effective utilization of waste paper sludge ash as a supplementary material for cement. Materials Today: Proceedings.
Khadra A., Hugosson M., Akander J., Myhren J.A. 2020. Development of a weight factor method for sustainability decisions in building renovation. Case study using renobuild. Sustainability, 12(17).
Kolajo T.E., Onovae J.E. 2023. Biochemical conversion of waste paper slurries into bioethanol. Scientific African, 20: e01703.
Makan A., Fadili A. 2020. Sustainability assessment of large-scale composting technologies using PROMETHEE method. Journal of Cleaner Production, 261.
Malinauskaite J., Jouhara H., Czajczyńska D., Stanchev P., Katsou E., Rostkowski P., et al. 2017. Municipal solid waste management and waste-to-energy in the context of a circular economy and energy recycling in Europe. Energy, 141: 2013–2044.
Manna M.S., Biswas S., Bhowmick T.K., Gayen K. 2020. Acid hydrolysis of the waste newspaper: comparison of process variables for finding the best condition to produce quality fermentable sugars. Journal of Environmental Chemical Engineering, 8(5):104345.
Mattinzioli T., Sol-Sánchez M., Martínez G., Rubio-Gámez M. 2020. A critical review of roadway sustainable rating systems. Sustainable Cities and Society, 63.
Menon R.R., Ravi V. 2022. Using AHP-TOPSIS methodologies in the selection of sustainable suppliers in an electronics supply chain. Cleaner Materials, 5: 100130.
Mkahal Z., Maherzi W., Mamindy-Pajany Y., Bouzar B., Abriak N.E. 2023. Development of a low-carbon binder based on raw, ground, and carbonated waste paper fly ash. Sustainable Materials and Technologies, 36: e00650.
Mmereki D. 2018. Current status of waste management in Botswana: a mini-review. Waste Management and Research, 36(7): 555–576.
Mohammed Irfan T.N., George T.S., Sainul Abidh K.M., Prakash S., Kanoth B.P., George N., et al., 2023. Waste paper as a viable sustainable source for cellulosic extraction by chlorine free bleaching and acid hydrolysis method for the production of PVA-starch/cellulose based biocomposites. Materials Today: Proceedings.
Mohan S., Joseph C.P. 2020. Biomining: an innovative and practical solution for reclamation of open dumpsite. Lecture Notes in Civil Engineering, 57: 167–178.
Nahar A., Akbor A. Md., Pinky N.S., Chowdhury N.J., Ahmed S., Gafur A. Md., et al. 2023. Waste newspaper driven activated carbon to remove polycyclic aromatic hydrocarbon from wastewater. Heliyon, 9(7): e17793.
Negaresh E., Antony A., Cox S., Lucien F.P., Richardson D.E., Leslie G. 2013. Evaluating the impact of recycled fiber content on effluent recycling in newsprint manufacture. Chemosphere, 92(11): 1513–1519.
Non-ferrous metal prices 2017 – letsrecycle.com. 2023. Available from https://www.letsrecycle.com/prices/metals/non-ferrous-metal-prices/non-ferrous-metal-prices-2017/ [accessed 14 August 2023].
Nzediegwu E., Dumont M.J. 2021. Optimization and mechanistic kinetic model: toward newsprint waste conversion to levulinic acid. Journal of Environmental Chemical Engineering, 9(6): 106637.
Paper Mart. 2022. Paper Mart Emagazine Oct-Nov, 2022. Available from https://papermart.in/paper-mart-emagazine-october-november-2022/ [accessed August 2023].
Pencil China. 2023. Recycled pencil: the most comprehensive introduction. Available from https://pencilchina.com/recycled-pencil/ [accessed 14 August 2023].
Provost-Savard A., Legros R., Majeau-Bettez G. 2023. Parametrized regionalization of paper recycling life-cycle assessment. Waste Management (Oxford), 156: 84–96.
Rahman M.S., Alam J., Rahman M.S., Alam J. 2020. Solid waste management and incineration practice: a study of Bangladesh. Indian Journal of Nuclear Medicine, 9(1): 1–25.
Recycling Monster. 2023. Old newspaper price today, United States country averages paid by scrap yards. Avaiable from https://www.recyclingmonster.com/price/old-newspaper/338 [accessed 14 August 2023].
Saeed M.O., Hassan M.N., Mujeebu M.A. 2009. Assessment of municipal solid waste generation and recyclable materials potential in Kuala Lumpur, Malaysia. Waste Management (Oxford), 29(7): 2209–2213.
Sagnak M., Berberoglu Y., Memis İ., Yazgan O. 2021. Sustainable collection center location selection in emerging economy for electronic waste with fuzzy best-worst and fuzzy TOPSIS. Waste Management (Oxford), 127.
Sapthagiri S., Devaiah M., Kalyan G., Kumar T.R. 2023. Fabrication and analysis of structural material using paper and medical wastes. Materials Today: Procedings.
Science Direct. 2022. Weighted sum method. Available from https://www.sciencedirect.com/topics/computer-science/weighted-sum-method [accessed 16 October 2022].
Sharma A. 2020. Triconda pencils journey. Available from https://storymaps.arcgis.com/stories/f89eccbdacd14d9287824831e6ef4a2b [accessed 14 August 2023].
Stafford W.H.L. 2020. WtE best practices and perspectives in Africa. In Municipal solid waste energy conversion in developing countries: technologies, best practices, challenges and policy. pp. 185–217.
Statista. 2022. Average annual prime industrial rent price per square meter in Europe in 1st quarter 2022, by country. Available from https://www.statista.com/statistics/858110/average-annual-industrial-rent-cost-per-square-meter-by-european-country/.
Statista. 2023. Global industry electricity price by component 2021. Available from https://www.statista.com/statistics/1257028/industrial [accessed 24 April 2023].
The Paper and Paperboard Packaging Environmental Council (PPEC). 2023. Paper-based packaging leads the way for Ontario’s household Blue Boxprogram. Available from https://ppec-paper.com/paper-based-packaging-leads-the-way-for-ontarios-household-blue-box-program/ [accessed 14 August 2023].
The World Bank Group. 2023. Trends in solid waste management. Available from https://datatopics.worldbank.org/what-a-waste/trends_in_solid_waste_management.html [accessed 27 April 2023].
Toner Buzz. 2023. Facts about paper: how paper affects the environment.
United Nations. 2023. Recycling paper waste to make pencils: an eco-friendly project by engineering students in India. [Online]. Available from https://www.un.org/en/academic-impact/recycling-paper-waste-make-pencils-eco-friendly-project-engineering-students-india.
US Department of Energy. 2019. Waste-to-energy from municipal solid wastes. [Online]. Available from energy.gov/eere/bioenergy [accessed 14 August 2023].
US Environmental Protection Agency. 2023. Municipal solid waste. Available from https://archive.epa.gov/epawaste/nonhaz/municipal/web/html/ [accessed 14 August 2023].
Verma M., Singh V., Mishra V. 2023. Bioelectricity generation by using cellulosic waste and spent engine oil in a concentric photobioreactor-microbial fuel cell. Journal of Environmental Chemical Engineering, 11(5): 110566.
Vishnu Priya M.L.S.N., Arunraj B., Rajesh N. 2021. Twin-fold new methodology arising from microwave induced carbonization of newspaper waste for the adsorptive desulfurization of model oil. Fuel, 299: 120873.
Wang Z., Wang Y., Xu G., Ren J. 2019. Sustainable desalination process selection: decision support framework under hybrid information. Desalination, 465.
Wicher P., Zapletal F., Lenort R. 2019. Sustainability performance assessment of industrial corporation using fuzzy analytic network process. Journal of Cleaner Production, 241.
Wong L.S., Chandran S.N., Rajasekar R.R., Kong S.Y. 2022. Pozzolanic characterization of waste newspaper ash as a supplementary cementing material of concrete cylinders. Case Studies in Construction Materials, 17: e01342.
World Atlas. 2023. How many trees are cut down each year to make pencils?—WorldAtlas. Available from https://www.worldatlas.com/articles/how-many-trees-are-cut-down-each-year-to-make-pencils.html [accessed 14 August 2023].
Yeh C.H., Xu Y. 2013. Sustainable planning of e-waste recycling activities using fuzzy multicriteria decision making. Journal of Cleaner Production, 52.
Yi P., Li W., Zhang D. 2021. Sustainability assessment and key factors identification of first-tier cities in China. Journal of Cleaner Production, 281.
Zhang D., Keat T.S., Gersberg R.M. 2010. A comparison of municipal solid waste management in Berlin and Singapore. Waste Management (Oxford), 30(5): 921–933.
Zhou Z., Liu T., Tan Y., Zhou W., Wang Y., Shi S.Q., et al. 2023. A high-performance, full-degradable bioinspired newspaper-based composite enhanced by borate ester bonds. Composites Science and Technology, 241: 110130.
Supplementary material
Supplementary Material 1 (DOC / 641 KB).
- Download
- 641.50 KB
Information & Authors
Information
Published In
FACETS
Volume 9 • January 2024
Pages: 1 - 12
Editor: Sharifu Ura
History
Received: 19 September 2023
Accepted: 14 December 2023
Version of record online: 13 June 2024
Copyright
© 2024 The Author(s). This work is licensed under a Creative Commons Attribution 4.0 International License (CC BY 4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original author(s) and source are credited.
Data Availability Statement
The author confirms that the data supporting the findings of this study are available within the article and its supplementary material.
Key Words
Sections
Subjects
Plain Language Summary
Paper Waste Remanufacturing for Pencil Production
Authors
Author Contributions
Conceptualization: ZTA
Data curation: ZTA
Formal analysis: ZTA
Methodology: ZTA
Validation: ZTA
Writing – original draft: ZTA
Competing Interests
There are no conflicts of interest to declare.
Funding Information
This work received no specific funding from the public or private sectors.
Metrics & Citations
Metrics
Other Metrics
Citations
Cite As
Ziyad Tariq Abdullah. 2024. Remanufacturing of paper waste for pencil production: a sustainable business assessment. FACETS.
9(): 1-12. https://doi.org/10.1139/facets-2023-0170
Export Citations
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
There are no citations for this item