Applied Filters
- Technology
Journal Title
Topics
Publication Date
Author
- Blaabjerg, Frede2
- Sanjeevikumar, P2
- Alvarado, Ricardo1
- Dagenais, Marc-André1
- Dunnington, Dewey W1
- Ertas, Ahmet H1
- Forbes, Bradley1
- Gunabalan, R1
- Helmer-Smith, Henry1
- Kieffer, Jean-Claude1
- Nugroho, Hanung Adi1
- Nurfauzi, Rizki1
- Ojo, Olorunfemi1
- Shakery, Azadeh1
- Spooner, Ian S1
- Suárez, Alvaro1
- Tabrizi, Shayan A1
- Vlachopoulos, Nicholas1
- Wheeler, Patrick W1
Access Type
1 - 8of8
Save this search
Please login to be able to save your searches and receive alerts for new content matching your search criteria.
Filters
| Search Name | Searched On |
|---|---|
| Subject Areas: Technology (8) | 21 Dec 2024 |
You do not have any saved searches
- OPEN ACCESS
- R. Gunabalan,
- P. Sanjeevikumar,
- Frede Blaabjerg,
- Patrick W. Wheeler,
- Olorunfemi Ojo, and
- Ahmet H. Ertas
This paper presents the characteristic behavior of direct vector control of two induction motors with sensorless speed feedback having the same rating parameters, paralleled combination, and supplied from a single current-controlled pulse-width-modulated voltage-source inverter drive. Natural observer design technique is known for its simple construction, which estimates the speed and rotor fluxes. Load torque is estimated by load torque adaptation and the average rotor flux was maintained constant by rotor flux feedback control. The technique’s convergence rate is very fast and is robust to noise and parameter uncertainty. The gain matrix is absent in the natural observer. The rotor speed is estimated from the load torque, stator current, and rotor flux. Under symmetrical load conditions, the difference in speed between two induction motors is reduced by considering the motor parameters as average and difference. Rotor flux is maintained constant by the rotor flux control scheme with feedback, and the estimation of rotor angle is carried out by the direct vector control technique. Both balanced and unbalanced load conditions are investigated for the proposed AC motor drive system. Experimental results presented in this paper show good agreement with the theoretical formulations. - OPEN ACCESSThis short communication focuses on exploiting the inherent advantages of discrete wavelet transformation (DWT) as a diagnostic tool for post-processing and for identifying the faults that occur in the standard high-voltage direct-current (HVDC) transmission network. In particular, a set of investigations are developed and examined for single-line-to-ground fault on the generation and on the load side converter, and DC-link fault. For this purpose, a standard 12-pulse line-commutated converter (LCC)-HVDC transmission network along with the DWT algorithm is numerically modeled in the MATLAB/PLECS simulation software. Furthermore, in this paper, a set of designed faulty conditions are predicted using the output of DWT and the results of numerical simulation are presented. Results are in good agreement with expectations to prove that DWT is an effective tool for fault diagnostics.
- OPEN ACCESSMultiparameter data with both spatial and temporal components are critical to advancing the state of environmental science. These data and data collected in the future are most useful when compared with each other and analyzed together, which is often inhibited by inconsistent data formats and a lack of structured documentation provided by researchers and (or) data repositories. In this paper we describe a linked table-based structure that encodes multiparameter spatiotemporal data and their documentation that is both flexible (able to store a wide variety of data sets) and usable (can easily be viewed, edited, and converted to plottable formats). The format is a collection of five tables (Data, Locations, Params, Data Sets, and Columns), on which restrictions are placed to ensure data are represented consistently from multiple sources. These tables can be stored in a variety of ways including spreadsheet files, comma-separated value (CSV) files, JavaScript object notation (JSON) files, databases, or objects in a software environment such as R or Python. A toolkit for users of R statistical software was also developed to facilitate converting data to and from the data format. We have used this format to combine data from multiple sources with minimal metadata loss and to effectively archive and communicate the results of spatiotemporal studies. We believe that this format and associated discussion of data and data storage will facilitate increased synergies between past, present, and future data sets in the environmental science community.
- OPEN ACCESSNowadays, individuals heavily rely on search engines for seeking information. The presence of information bubbles (filter bubbles and echo chambers) can threaten the effectiveness of these systems in providing unbiased information and damage healthy civic discourse and open-minded deliberation. In this paper, we propose a new paradigm for search that aims at mitigating the information bubble in the search. The paradigm, which we call perspective-based search (PBS), is based on the intuition that in a fair search the user should not be limited to the results corresponding to a specific perspective of the search topic. Briefly, in PBS, different perspectives of the search topic are identified and presented to the user and the user can select a perspective for the search results. In this paper, we focus on the paradigm itself, why it is an appropriate solution, and how it differs from other solutions. We raise new questions and call for research on the paradigm and on providing solutions for implementing its required components. We do not aim at providing any specific implementation for it, although we provide some hints on implementing it. We also provide a survey of the related concepts and methods and discuss their differences with PBS.
- OPEN ACCESSThis paper outlines the testing and monitoring procedure of a scale model Warren truss constructed of 2 inch × 4 inch (38 mm × 89 mm) members and bolted connections within a laboratory environment. Several forms of deflection monitoring and strain monitoring instrumentation were utilized throughout this laboratory testing phase of a longer-term research program. Instruments included: an automatic total station, linear variable differential transducers, light detection and ranging, electric strain gauges, and distributed optical fibre sensors. The distributed point load-testing regime included two configurations: (i) the original truss configuration and (ii) the installation of intermediate columns beneath the truss. Objectives of this phase included identifying instrument capabilities, limitations, and overall reliability/effectiveness with respect to representing the behaviour of the truss system. In addition, members of interest and critical monitoring locations along the Warren truss were determined. The purpose of this laboratory endeavour was to determine an optimized structural-health monitoring program prior to implementation in a heritage timber Warren truss structure within the infrastructure inventory of the Department of National Defence (DND). An options analysis of monitoring techniques was conducted whereby the effectiveness of each instrumentation type was evaluated according to relevant metrics/factors to determine an effective monitoring technique for this heritage building and other similar DND truss structures.
- OPEN ACCESSThis paper reviews the challenges posed by the physics of the interaction of high-peak power femtosecond lasers with ultrathin foil targets. Initially designed to produce warm solid-density plasmas through the isochoric heating of solid matter, the interaction of an ultrashort pulse with ultrathin foils is becoming more and more complex as the laser intensity is increased. The dream of achieving very hot solid density matter with extreme specific energy density faces several bottlenecks discussed here as related to the laser technology, to the complexity of the physical processes, and to the limits of our current time-resolved instrumentations.
- OPEN ACCESSMalaria is a life-threatening parasitic disease transmitted to humans by infected female Anopheles mosquitoes. Early and accurate diagnosis is crucial to reduce the high mortality rate of the disease, especially in eastern Indonesia, where limited health facilities and resources contribute to the effortless spread of the disease. In rural areas, the lack of trained parasitologists presents a significant challenge. To address this issue, a computer-aided detection (CAD) system for malaria is needed to support parasitologists in evaluating hundreds of blood smear slides every month. This study proposes a hybrid automated malaria parasite detection and segmentation method using image processing and deep learning techniques. First, an optimized double-Otsu method is proposed to generate malaria parasite patch candidates. Then, deep learning approaches are applied to recognize and segment the parasites. The proposed method is evaluated on the PlasmoID dataset, which consists of 468 malaria-infected microscopic images containing 691 malaria parasites from Indonesia. The results demonstrate that our proposed approach achieved an F1-score of 0.91 in parasite detection. Additionally, it achieved better performance in terms of sensitivity, specificity, and F1-score for parasite segmentation compared to original semantic segmentation methods. These findings highlight the potential of this study to be implemented in CAD malaria detection, which could significantly improve malaria diagnosis in resource-limited areas.
- OPEN ACCESSUniversity campus networks need wired (ethernet) and dense wireless fidelity networks that have devices like access points, switches, and routers that are always turned on. Consequently, they generate two important problems: the energy bill and the influence of carbon dioxide into the atmosphere. Energy savings are the solution to those problems. There are several proposals to augment the energy savings separately in ethernet and wireless fidelity, but there is no integrated method to simultaneously reduce them in both parts of the networks. Our novel method combines idle cycling and machine learning techniques to efficiently obtain energy savings in both parts of the network simultaneously. We categorize network devices into two groups: (a) those that are always turned on and (b) those that can be dynamically turned on or off based on network performance. We formulated two algorithms that decide when to turn on and off access points. We use Ward's machine learning hierarchical clustering technique to optimize the energy savings of our model in the network of the Unidades Tecnológicas de Santander (Bucaramanga, Colombia). We showed that energy savings of 21.5 kWh per day are possible. The success of the model in this context highlights its potential to achieve substantial energy savings.